What does the toilet function test include?‖ Topcera Sanitary Ware

Put the toilet into the water test area, install water parts and hoses, add red ink to the seat ring, fill the water and level the seat ring,

static pressure water, and then use a flashlight to observe whether water leakage.

Slow down seat cover test: Test the opening and closing action of the toilet seat to test its durability and reliability.

Plastic balls flushing test: 100 polypropylene pellets with diameter of 19mm and bulk density of 0.85 ~ 0.90g/cm3 were used for flushing test,

which was carried out for three consecutive times to ensure the test can be pass.

Ping-pong flushing test: Put table tennis balls with a diameter of 40mm into the toilet, start the flushing, and test whether the flushing is normal.

Red ink flushing test: The ink line test is carried out. The length of the ink line remaining after each flushing is no more than 50mm

to ensure that the flushing performance meets the requirements. The height of the water seal should be no less than 5cm.

Half flush and full flush test: the average flushing water consumption of the toilet is 4L to 6L;

   

Toilet paper flushing test: Generally put 10 paper towels into the toilet seat to test whether the toilet is blocked;

Fake stool flushing test:  Flush test with artificial stool to ensure that no stains remain after flushing;